Cubieboard has thickness 2.00mm 2×20-pin-header that is not so suitable for home hobbiest.
Arduino and other small boards uses 2.54mm pin (0.100inch)
To connect it I have bought 2.00mm to 2.54mm 40pcs Wire Cable 2P to 1P.
|
2.00mm to 2.54mm (2P to 2x1P) wires |
Till it comes I will use my 2,54mm cables, you can connect 2 of them (not more) side by side:
Of course, you can buy BreadBoard For Cubieboard which would solve the issue here.
It would be very useful to buy something like this Connector (2.00mm to 2.54mm / 2×20):
I found it in this
shop but was not able to find it in eBay. If anybody has a better solution, please leave a comment.
Related Posts
Mount SATA drive in Cubieboard with Lubuntu
The main advantage of cubieboard is it’s SATA connector. I have old HDD from notebook, so I wanted to use it as a media server. This post has 3 parts related to HDD connected to[…]
Continue reading ...
Which single board computer to select?
My first SoC board was pcduino. Since it was one of the first boards and I used it 24/7. It gave me some experience and I really like that Allwinner SoC A10 with 1GB RAM and[…]
Continue reading ...
Cubieboard2 – Lubuntu – Enabling Print Screen
When I installed Lubuntu on my new Cubieboard2, the print screen was not working. When I hit the “Print Screen” button I got this message: I’ve fixed it by installing the scrot application: sudo apt-get install scrot[…]
Continue reading ...